Desander
The entire shaker deck undergoes heat treatment to relieve welding stress, enabling it to withstand high G force. The shaker screen is installed with a mechanical ratchet wrench gear for quick tightening, facil itating easy dis- assembly and ensuring long-lasting durability.
The wedge blocks for tightening the screen mesh are made of nylon, providing high temperature resistance, cor- rosion resistance, and wear resistance. Vibration motor:Italian OLI brand.
Polyurethane material is used for sealing between the shale shaker and screen, ensuring a long service life and easy replacement.
The supporting rubber strips for the bottom frame of the vibration screen are made of stainless steel, offering strong corrosion resistance and a long service life.
The electrical control box is made of aluminum alloy/stainless steel explosion-proof material, ensuring good sealing and strong corrosion resistance.
The pre-tensioned shaker screen allows for convenient and quick disassembly and replacement.
The mud outlet can be switched between bottom and side outlets, accommodating flexible installation on site. The angle of the shaker deck can be mechanically adjusted while working at both ends , adapting to different processing capacities.
Type: Desander with GNZS752 Series Mini Shale Shaker Screen Area:1.4m2
Model: GNZJ752K-M2SK
Application: For oil gas drilling small drilling rig , CBM drilling,HDD,Water Well drilling.
Features:Small footprint, economic choice, acceptable drying solids.
| Model | GNZJ752K-M2SK | |
| Treating Capacity | 240m³/h(1056GPM) | |
| Desander Cone | 10"x 2 each | |
| Feeding Size | 6 inch | |
| Output Size | 8 inch | |
| Working Pressure | 0.25~0.4MPa | |
| Bottom Shale Shaker Specs |
Bottom shaker model | DLS752K |
| Vibration Mode | Linear Motion | |
| Vibration Motor | 2×1.0KW | |
| Screen area | 1.35m² | |
| Deck Angle Range | +2° | |
| Adjust G Force | ≤7.5G | |
| Weight(Kg) | 1375 | |
| L×W×H(mm) | 2124×1697×1888 | |
Type: Desander without downstream drying shale shaker
Model: GNZJW-2SJ
Application: For oil gas drilling un-weighted drilling mud.
Features:Small footprint, economic choice, no consumable screens.
Result: Wet cuttings, not recommended for Weighted mud and drying solids.
| Model | GNZJW-2SJ | |
| Treating Capacity | 240m³/h(1056GPM) | |
| Desander Cone | 10"x 2 each | |
| Feeding Size | 6 inch | |
| Output Size | 8 inch | |
| Working Pressure | 0.25~0.4MPa | |
| Bottom Shale Shaker Specs |
Bottom shaker model | N/A |
| Vibration Mode | ||
| Vibration Motor | ||
| Screen area | ||
| Deck Angle Range | ||
| Adjust G Force | ||
| Weight(Kg) | 475 | |
| L×W×H(mm) | 2118×886×1901 | |
Type: Desander without downstream drying shale shaker
Model: GNZJW-3SJ
Application: For oil gas drilling un-weighted drilling mud.
Features:Small footprint, economic choice, no consumable screens.
Result: Wet cuttings, not recommended for Weighted mud and drying solids.
| Model | GNZJW-3SJ | |
| Treating Capacity | 360m³/h(1584GPM) | |
| Desander Cone | 10"x 3 each | |
| Feeding Size | 6 inch | |
| Output Size | 8 inch | |
| Working Pressure | 0.25~0.4MPa | |
| Bottom Shale Shaker Specs |
Bottom shaker model | N/A |
| Vibration Mode | ||
| Vibration Motor | ||
| Screen area | ||
| Deck Angle Range | ||
| Adjust G Force | ||
| Weight(Kg) | 523 | |
| L×W×H(mm) | 2118×886×1901 | |